Key Features

● 1500W Industrial-Grade High-Power Motor: Heavy-duty 1500W pure copper motor delivers strong and stable power output, providing exceptional performance for continuous heavy-duty demolition work.

● 55J Ultra-High Impact Energy: Industry-leading 55J impact energy combined with 1850bpm impact rate ensures efficient breaking of concrete, brick, stone, asphalt and other hard materials.

● Professional SDS-HEX Chuck System: Robust SDS-HEX chuck provides secure and quick tool changes, ensuring maximum power transfer and preventing bit slippage during operation.

● Ergonomic Dual-Handle Design: Main D-handle with anti-slip rubber grip and auxiliary U-handle allow for comfortable two-handed operation, reducing user fatigue and improving control.

● High-Efficiency Cooling System: Large-area ventilation system with optimized air flow design effectively dissipates heat generated during continuous operation, extending motor service life.

● Vibration Reduction Technology: Built-in vibration damping system minimizes vibration transmitted to the user, reducing hand-arm vibration syndrome and improving comfort during long hours of use.

● Durable Metal Gear Housing: High-strength aluminum alloy gear housing provides excellent protection for internal components, ensuring durability in harsh construction site environments.

● Complete Professional Accessory Kit: Comes with all necessary accessories including point chisel, flat chisel, carbon brushes, oil feeder, spanners and VDE power cord for immediate use.

● Heavy-Duty Metal Storage Case: Rugged metal storage case provides secure storage and transportation for the demolition hammer and all accessories, protecting them from damage during transit.

Expert Advice

Daily & Regular Maintenance

Before Each Use: Check power cord and plug for damage; inspect chisel for wear or damage; ensure all screws and bolts are tight; lubricate the chuck with the provided oil feeder.

After Each Use: Clean the tool thoroughly to remove dust and debris; inspect carbon brushes for wear; replace carbon brushes when they are worn down to 5mm.

Every 50 Hours of Use: Lubricate the gear mechanism with high-quality grease; inspect the chuck for wear; check all electrical connections.

Every 200 Hours of Use: Perform a complete service including gear inspection, bearing lubrication and motor cleaning by a qualified technician.

Operation Guidelines

Always use appropriate personal protective equipment including safety goggles, hearing protection, dust mask, gloves and steel-toe boots.

Secure the workpiece properly before starting demolition work to prevent movement and accidents.

Hold the demolition hammer firmly with both hands; maintain a stable stance and good balance during operation.

Apply steady, moderate pressure to the tool; do not force it or apply excessive pressure as this will reduce performance and cause premature wear.

Allow the tool to run at full speed before contacting the workpiece.

Do not operate the tool continuously for more than 30 minutes; allow a 10-minute cooling break to prevent overheating.

When breaking large areas, work in sections and start from the edges, moving inward.

Safety Precautions

Never operate the tool without proper guards and shields in place.

Do not use the tool for any purpose other than demolition and breaking work.

Keep children and bystanders at a safe distance from the operating area.

Do not operate the tool in wet or rainy conditions to avoid electric shock.

Unplug the power cord before changing accessories, performing maintenance or cleaning the tool.

Never point the chisel at yourself or other people.

Do not use damaged or worn chisels; always use genuine Cyclone accessories.

Disconnect the power supply immediately if the tool malfunctions or makes abnormal noises.

Troubleshooting Guide

FAQs

▼ What materials can this demolition hammer break?

The Cyclone CKL-110 is designed to break through concrete, reinforced concrete (up to 150mm), brick, stone, asphalt, tile and masonry. It is ideal for demolition work, wall breaking, floor removal, foundation work and road repair.

▼ How do I change the chisel?

To change the chisel, unplug the tool, pull back the chuck sleeve, insert the chisel shank fully into the chuck, and release the sleeve. Rotate the chisel slightly to ensure it is locked securely in place.

▼ How often should I lubricate the chuck?

The chuck should be lubricated before each use with the provided oil feeder. This ensures smooth operation and prevents wear and corrosion of the chuck mechanism.

▼ Can I use this demolition hammer for drilling?

No, this is a dedicated demolition hammer designed for breaking and chiseling work only. It does not have a drilling function. For drilling applications, use a rotary hammer drill.

▼ What is the duty cycle of this demolition hammer?

The recommended duty cycle is 30 minutes of continuous operation followed by a 10-minute cooling break. This prevents overheating and extends the service life of the motor and internal components.