Key Features

● Triple-Motor Triple-Pump System: Features three independent 2.0HP motors and triple-piston pumps, delivering exceptional total air delivery (765L/min @50Hz, 918L/min @60Hz), the highest in its class for oil-free light industrial compressors.

● Dual-Frequency Versatility: Optimized for both 50Hz and 60Hz power grids, with corresponding performance boosts, making it suitable for use across different regions.

● Maintenance-Free Oil-Free Operation: No pump oil required, eliminating messy oil changes and ensuring clean, contamination-free air output.

● Built-In Redundancy & Load Adaptability: Can operate with 1, 2 or all 3 motors simultaneously, providing built-in redundancy, load-adaptive performance, and the ability to continue production even if one motor requires maintenance.

● Portable Wheeled Design: Equipped with heavy-duty rubber wheels and an ergonomic handle, allowing for easy mobility around large workshops or between job locations.

● Robust 100L Air Tank: Constructed with 3.0mm thick steel (Dia.350×830mm), meeting CE/ASME safety standards for reliable pressure retention and extended runtime between cycles.

● Precision Pressure Control: Dual pressure gauges and adjustable regulator for accurate pressure monitoring and control, with automatic shut-off at 8Bar.

● Enhanced Power & Performance: Total 6.0HP (4.5KW) power delivers exceptional air delivery, suitable for medium-duty workshop and light industrial applications.

● Optimized Cooling System: Each pump assembly features dedicated cooling fans, ensuring effective heat dissipation even during continuous multi-motor operation.

● Durable Construction: High-quality components and motor windings ensure long service life and reliable daily use.

Expert Advice

● Daily Maintenance: No pump oil changes required. Keep all three air intake filters clean to ensure optimal airflow and performance.

● Pressure Operation: The compressor is designed for a maximum working pressure of 8Bar (116PSI). Do not attempt to adjust the pressure switch beyond factory settings.

● Ventilation & Operation Environment: Install the compressor in a well-ventilated area with at least 1.5 meters of clear space around the unit. Avoid enclosed spaces or extreme temperatures to prevent overheating.

● Frequency-Specific Performance: When operating on 60Hz power, expect higher air delivery (918L/min) but ensure the power supply is stable to prevent motor stress.

● Drain Condensed Water: After each use, drain any condensed water from the bottom of the 100L tank using the drain valve to prevent internal corrosion. For continuous use, perform drainage every 4 hours.

● Duty Cycle & Cooling: Allow a 10-minute cooling break after every 20 minutes of continuous operation with all three motors running to prevent overheating and extend service life.

● Mobility Safety: When moving the compressor, always use the integrated handle and ensure the air tank is depressurized to below 1Bar for safe transportation.

● Installation Guidelines: If using in a permanent workshop, install the compressor on a flat, level surface. Ensure proper grounding and electrical protection (circuit breaker rated for at least 25A).

● Storage Guidelines: When storing, ensure the tank is depressurized and drain all moisture from the tank. Store in a dry, well-ventilated area away from dust and moisture.

Troubleshooting Guide

FAQs

▼ What are the advantages of the triple-motor design?

The triple-motor system provides three key benefits: 1) Industry-leading total air delivery (up to 918L/min), suitable for demanding workshop and light industrial applications; 2) Built-in redundancy, allowing continued use even if one or two motors require maintenance; 3) Load-adaptive operation, running on 1, 2 or 3 motors based on air demand to reduce energy consumption.

▼ What applications is this compressor suitable for?

The Cyclone FAST60100TREU 100L 6.0HP triple-motor oil-free compressor is ideal for medium-duty workshop tasks, multiple simultaneous pneumatic tools (spray guns, nail guns, sanders), small-scale industrial operations and continuous production environments.

▼ How does frequency affect performance?

At 50Hz, each pump runs at 2850r.p.m delivering 255L/min (total 765L/min). At 60Hz, the speed increases to 3450r.p.m, boosting each pump to 306L/min (total 918L/min), providing faster inflation and tool operation in 60Hz regions.

▼ Is this compressor suitable for continuous use?

This is a medium-duty compressor designed for intermittent-to-semi-continuous use. It is recommended to allow a 10-minute cooling break after every 20 minutes of continuous operation with all three motors running to prevent overheating and extend service life.

▼ What safety standards does the tank meet?

The 100L air tank meets CE/ASME safety standards, with a 3.0mm thick steel construction (Dia.350×830mm) ensuring reliable pressure retention during use.