Key Features

●  Quad-Motor Quad-Pump System: Features four independent 2.0HP motors and quad-piston pumps, delivering industry-leading total air delivery (1020L/min @50Hz, 1224L/min @60Hz), ideal for the most demanding workshop applications.

●  Dual-Frequency Versatility: Optimized for both 50Hz and 60Hz power grids, with corresponding performance boosts, making it suitable for use across different regions.

●  Maintenance-Free Oil-Free Operation: No pump oil required, eliminating messy oil changes and ensuring clean, contamination-free air output.

●  Built-In Redundancy & Load Adaptability: Can operate with 1, 2, 3 or all 4 motors simultaneously, providing exceptional built-in redundancy, load-adaptive performance, and the ability to continue production even if one or two motors require maintenance.

●  Portable Wheeled Design: Equipped with heavy-duty rubber wheels and handles, allowing for easy mobility around large workshops or between job locations.

●  Ultra-Robust 200L Air Tank: Constructed with 3.5mm thick steel (Dia.450×1000mm), meeting CE/ASME safety standards for reliable pressure retention and extended runtime between cycles.

●  Precision Pressure Control: Dual pressure gauges and adjustable regulator for accurate pressure monitoring and control, with automatic shut-off at 8Bar.

●  Enhanced Power & Performance: Total 8.0HP (6.0KW) power delivers exceptional air delivery, suitable for medium-duty workshop and light industrial applications.

●  Optimized Cooling System: Each pump assembly features dedicated cooling fans, ensuring effective heat dissipation even during continuous quad-motor operation.

●  Durable Construction: High-quality components and motor windings ensure long service life and reliable daily use.

Expert Advice

●  Daily Maintenance: No pump oil changes required. Keep all four air intake filters clean to ensure optimal airflow and performance.

●  Pressure Operation: The compressor is designed for a maximum working pressure of 8Bar (116PSI). Do not attempt to adjust the pressure switch beyond factory settings.

●  Ventilation & Operation Environment: Install the compressor in a well-ventilated area with at least 2 meters of clear space around the unit. Avoid enclosed spaces or extreme temperatures to prevent overheating.

●  Frequency-Specific Performance: When operating on 60Hz power, expect higher air delivery (1224L/min) but ensure the power supply is stable to prevent motor stress.

●  Drain Condensed Water: After each use, drain any condensed water from the bottom of the 200L tank using the drain valve to prevent internal corrosion. For continuous use, perform drainage every 4 hours.

●  Duty Cycle & Cooling: Allow a 10-minute cooling break after every 20 minutes of continuous operation with all four motors running to prevent overheating and extend service life.

●  Mobility Safety: When moving the compressor, always use the integrated handles and ensure the air tank is depressurized to below 1Bar for safe transportation.

●  Installation Guidelines: If using in a permanent workshop, install the compressor on a flat, level, reinforced concrete foundation. Ensure proper grounding and electrical protection (circuit breaker rated for at least 32A).

●  Storage Guidelines: When storing, ensure the tank is depressurized and drain all moisture from the tank. Store in a dry, well-ventilated area away from dust and moisture.

Troubleshooting Guide

FAQs

▼ What are the advantages of the quad-motor design?

The quad-motor system provides three key benefits: 1) Industry-leading total air delivery (up to 1224L/min), suitable for the most demanding workshop and light industrial applications; 2) Exceptional built-in redundancy, allowing continued use even if one or two motors require maintenance; 3) Load-adaptive operation, running on 1-4 motors based on air demand to reduce energy consumption.

▼ What applications is this compressor suitable for?

The Cyclone FAST80200EU 200L 8.0HP quad-motor oil-free compressor is ideal for heavy-duty workshop tasks, multiple simultaneous pneumatic tools (spray guns, nail guns, sanders, grinders), small-scale industrial operations and continuous production environments.

▼ How does frequency affect performance?

At 50Hz, each pump runs at 2850r.p.m delivering 255L/min (total 1020L/min). At 60Hz, the speed increases to 3450r.p.m, boosting each pump to 306L/min (total 1224L/min), providing faster inflation and tool operation in 60Hz regions.

▼ Is this compressor suitable for continuous use?

This is a medium-duty compressor designed for intermittent-to-semi-continuous use. It is recommended to allow a 10-minute cooling break after every 20 minutes of continuous operation with all four motors running to prevent overheating and extend service life.

▼ What safety standards does the tank meet?

The 200L air tank meets CE/ASME safety standards, with a 3.5mm thick steel construction (Dia.450×1000mm) ensuring reliable pressure retention during use.