Key Features

●  Heavy-Duty Cast Iron Pump: 2.0HP belt-driven pump delivers consistent airflow with excellent wear resistance and long service life, built for daily workshop use.

●  100L CE/ASME Certified Air Tank: Robust thick-gauge steel tank offers extended runtime, ideal for reducing pressure drops during light-to-medium use.

●  Consistent Airflow Performance: Delivers up to 206L/min max airflow, suitable for impact wrenches, spray guns, sanders and common pneumatic tools.

●  Belt-Driven Design for Reduced Wear: Belt-drive system lowers pump speed to 1100r.p.m, reducing component stress and extending the pump’s lifespan.

●  Portable Heavy-Duty Build: Fitted with durable wheels and a reinforced handle for easy transport between workstations, perfect for both fixed and mobile service use.

●  Built-In Safety Protection: Features 12.0A overload protector and pressure relief valve to ensure safe, reliable operation under varying loads.

Expert Advice

●  Daily Tank Drainage: Always drain condensed moisture from the 100L tank after each use to prevent internal corrosion and extend tank life.

●  Electrical Safety: Use a dedicated grounded power outlet rated for 9.5A; avoid long extension cords to prevent voltage drop and motor damage.

●  Ventilation & Cooling: Operate in a well-ventilated area with adequate clearance around the motor and pump to prevent overheating during use.

●  Pre-Use Inspection: Check belt tension, hoses, fittings and connections for wear or leaks; verify pump oil level (0.45L capacity) is within the recommended range before starting.

●  Regular Maintenance: Follow the maintenance schedule for oil checks and changes, belt tension adjustments, and filter cleaning to keep the pump running smoothly.

●  Duty Cycle Compliance: Adhere to the rated duty cycle; allow sufficient cooling breaks between continuous runs to protect the motor.

Troubleshooting Guide

FAQs

▼ What size air compressor do I need?

The right compressor size depends primarily on the CFM (Cubic Feet per Minute) and pressure requirements of your pneumatic tools.

For light-to-medium duty workshop and trade tasks (e.g., impact wrenches, spray guns, sanders, general pneumatic tools), the Cyclone V-0.17EU 100L 2.0HP belt-driven model delivers the airflow needed for stable, reliable performance.

For lighter DIY tasks, a smaller model may be sufficient; for heavy industrial use, choose a compressor with a higher CFM rating that exceeds your tool’s requirements by at least 20%.

▼ How often must I drain an air compressor?

Drain the tank daily after every use, or more frequently in humid environments. This prevents water buildup, internal corrosion, and rust, protecting the tank and downstream tools from contamination. Cyclone compressors are fitted with a convenient drain valve for quick and easy maintenance.

▼ What oil do I use in my air compressor?

Always use compressor-grade, non-detergent oil formulated for reciprocating air pumps. For this Cyclone model, use 0.45L of the recommended oil, and refer to the user manual for the exact viscosity grade required. Using the correct oil ensures optimal lubrication, reduces wear, and extends the motor’s service life.

▼ Can I use an extension cord with my compressor?

We strongly recommend avoiding extension cords whenever possible, as they can cause voltage drop, overheating, and permanent motor damage. If use is unavoidable, select a short, heavy-duty cord rated for the compressor’s full 9.5A current draw to minimize power loss.

▼ What size air hose should I use?

The correct hose size depends on your tool’s air consumption and the total hose length.

For light-to-medium duty use with this Cyclone compressor, a 3/8" (10mm) diameter hose is recommended to avoid pressure drop and maintain airflow efficiency.

For longer runs or multi-tool use, a 1/2" (13mm) diameter hose is also suitable.