Cyclone V-0.60EU Belt-Driven Air Compressor Industrial Grade Cast Iron Air Pump Big Air Delivery Compressor for Heavy Duty Workshop Use Workshop & Professional Use Professional Workshop Applications
Engineered for industrial strength and maximum airflow, the Cyclone 300L 4kW (5.5HP) belt-driven air compressor is equipped with a heavy-duty cast iron pump for long service life and stable performance. Designed for continuous heavy-duty operation in workshops, garages, construction sites and industrial applications, this 380-400V unit delivers high-volume compressed air with reliable pressure stability. Backed by our in-house manufacturing and strict quality control, it is the professional workhorse for high-demand pneumatic systems.
Category:
Belt Driven Compressors-(Japan/USA Style Casting iron Air Pump)
Product Details
|
On the technical data plate we will state following information |
|
|
Name |
Casting Iron Air Pump Big Air Delivery Professional Belt Driven Compressor |
|
Cyclone Model NO: |
V-0.60EU |
|
Motor Peak Power |
4KW/5.5HP |
|
Input Voltage: |
380-400V/50HZ |
|
Max Air Delivery |
656L/min |
|
Air Delivery@40Psi |
600L/min |
|
Air Delivery@90Psi |
578L/min |
|
Shaft Rated Speed |
860rpm |
|
Bore / Piston Size |
90mm*2 |
|
Stroke Length |
60mm |
|
Pump Flywheels |
370mm |
|
Motor pulley size |
110mm |
|
Pump Lubricate Oil capacity |
1.0L |
|
Rated Electric Current |
9.0A |
|
Overload Current Protector |
10.0A |
|
Startig Capacity |
300V,with 20M power calbe |
|
Max working pressure |
8Bar / 0.8Mpa / 116PSI |
|
Cut-In pressure |
6Bar / 0.6Mpa/ 90PSI |
|
Tank Capacity |
Ce/ASME Qualified 300Lt Air Tank |
|
Noise (Lwa) |
95dB |
|
N.W/G.W |
176Kgs / 205Kgs. |
|
Packing Size(L+W*H) |
167*56*114CM |
|
Medium |
Nonlethal Compressed Air |
Key Features
● Heavy-Duty Cast Iron Belt Driven Pump: Delivers powerful, stable performance with reduced wear and extended service life for industrial heavy-duty use.
● 300L Large Capacity Air Tank: Provides stable pressure and long continuous operation, ideal for multi-tool and high-demand applications.
● High Efficiency Big Airflow: Delivers up to 656L/min max airflow to meet the needs of heavy-duty pneumatic tools and industrial equipment.
● Integrated Pressure Regulator & Gauges: Allows precise pressure control and real-time monitoring for different working tasks.
● Stable & Durable Structure: Reinforced frame, large wheels and professional design for long-term daily use in harsh working environments.
● Built-in Safety Protection: Equipped with overload protector and pressure relief valve to ensure safe and reliable operation.
Expert Advice
● Daily Tank Drainage: Always drain moisture from the tank after use to prevent internal corrosion, contamination and maintain air quality.
● Electrical Safety: Use dedicated 380-400V three-phase power supply; avoid long extension cords to prevent voltage drop and motor damage.
● Ventilation & Cooling: Operate the compressor in a well-ventilated area to prevent overheating and ensure optimal performance.
● Pre-Use Check: Inspect hoses, fittings, connections and belt tension before each use to ensure safe and efficient operation.
● Regular Maintenance: Follow the maintenance schedule for oil checks and replacements to keep the pump running smoothly.
Troubleshooting Guide
|
Problem |
Possible Cause |
Recommended Solution |
|
Compressor fails to start |
1. No power supply / faulty plug, cable or socket 2. Blown fuse or tripped circuit breaker 3. Overload protection activated due to overheating 4. Defective pressure switch |
1. Verify power supply, inspect plug, cable and socket for damage 2. Reset circuit breaker or replace the fuse with the correct rating 3. Allow the motor to cool completely, then restart the unit 4. Test and replace the pressure switch if it fails to activate properly |
|
Motor runs but pump does not operate |
1. Loose or broken drive belt 2. Misaligned motor and pump pulleys 3. Jammed or seized pump mechanism |
1. Inspect, adjust or replace the drive belt 2. Align pulleys to correct position 3. Disassemble the pump to remove debris or obstructions |
|
Pressure builds too slowly or fails to reach rated pressure |
1. Air leaks in hoses, fittings, check valve, or tank 2. Worn piston rings, valves, or seals in the pump 3. Clogged air intake filter 4. Pressure regulator set incorrectly |
1. Perform a leak test with soapy water; tighten connections or replace faulty parts 2. Inspect and replace worn piston rings, reed valves, or seals 3. Clean or replace the air filter to restore airflow 4. Adjust the regulator to the correct working pressure; check for regulator damage |
|
Excessive noise, vibration or unusual rattling |
1. Loose mounting bolts, fasteners, or pump components 2. Worn motor or pump bearings 3. Damaged or unbalanced flywheel 4. Unit placed on an uneven or unstable surface |
1. Tighten all bolts and fasteners securely 2. Inspect and replace worn bearings 3. Service or replace the flywheel if damaged or out of balance 4. Position the compressor on a flat, level, and stable surface |
|
Motor overheats or shuts down prematurely |
1. Poor ventilation or blocked cooling vents 2. Continuous operation beyond the rated duty cycle 3. Low oil level or degraded pump oil 4. Dirty or clogged cooling fins |
1. Move to a well-ventilated area; clear obstructions around vents 2. Follow duty cycle guidelines; allow sufficient cooling breaks 3. Check and top up pump oil to the correct level; replace oil if contaminated 4. Clean cooling fins to improve heat dissipation |
|
Air pressure drops significantly under load |
1. Undersized, kinked, or damaged air hoses 2. Incorrectly adjusted or faulty pressure regulator 3. Leaking check valve in the tank 4. Excessive air consumption from connected tools |
1. Replace with correct diameter hoses, remove kinks, repair leaks 2. Calibrate or replace the pressure regulator 3. Inspect, clean, or replace the check valve 4. Ensure tool air consumption matches compressor capacity |
FAQs
▼ What size air compressor do I need?
The right compressor size depends primarily on the CFM (Cubic Feet per Minute) and pressure requirements of your pneumatic tools.
For heavy-duty industrial and workshop applications (e.g., multi-tool stations, impact wrenches, spray guns, sanders), the Cyclone V-0.60EU 300L 5.5HP belt-driven model provides sufficient high-volume airflow for stable, continuous performance.
For lighter tasks, choose a smaller model; for extra heavy industrial use, select a compressor with CFM rating exceeding your tool needs by at least 20%.
▼ How often must I drain an air compressor?
Drain the tank daily after every use, or more frequently in humid environments. This prevents water buildup, internal corrosion, and rust, protecting the tank and downstream tools from contamination. Cyclone compressors are fitted with a convenient drain valve for quick and easy maintenance.
▼ What oil do I use in my air compressor?
Always use compressor-grade, non-detergent oil formulated for reciprocating air pumps. For this Cyclone model, use 1.0L of the recommended oil and refer to the user manual for the exact viscosity grade. Using correct oil ensures optimal lubrication, reduces wear, and extends service life.
▼ Can I use an extension cord with my compressor?
We strongly recommend avoiding extension cords. This industrial unit requires dedicated 380-400V three-phase power. Long cables cause voltage drop, overheating and permanent motor damage.
▼ What size air hose should I use?
The correct hose size depends on tool air consumption and total length.
For high-flow industrial applications with this Cyclone compressor, a 1/2" (13mm) diameter hose is strongly recommended to avoid pressure drop and ensure maximum airflow efficiency.
Keywords:
Previous page
Next page
Previous page
Next page
Related products
Contact
0086-576-86330886 86330885
+86-13586276000
sailor@chinacyclone.com
Get a Free Consultancy
