Key Features

●  Industry-Leading Ultra-High Volume Air Delivery: Achieves an exceptional 525L/min air delivery, providing uninterrupted high-pressure airflow for multiple heavy-duty pneumatic tools operating simultaneously.

●  Industrial-Grade 5.0HP High-Torque Motor: Delivers 3.7KW peak power output with massive starting torque, ensuring rock-solid stable performance under continuous full-load heavy-duty operating conditions.

●  Large-Bore Dual-Cylinder Design: Features oversized 2*Dia.80mm pistons with 55mm stroke length, optimized for maximum air displacement per revolution and superior compression efficiency.

●  Dual Working Pressure Capabilities: Supports both 8Bar (116PSI) and 10Bar (145PSI) maximum working pressures, adapting to the full range of pneumatic tool requirements from light maintenance to heavy industrial applications.

●  300L Extra-Large Capacity Horizontal Air Tank: CE/ASME qualified extra-thick gauge steel horizontal air tank provides massive extended air reserve, drastically reducing motor startup frequency, minimizing energy consumption and enabling prolonged continuous operation of high-demand pneumatic tools.

●  Optimized Ultra-Low Speed Operation: Operates at a rated pump shaft speed of only 950R.P.M, perfectly balanced for maximum air compression efficiency, minimal component wear, ultra-low vibration and exceptionally quiet operation.

●  Efficient Belt-Drive Transmission System: Provides smooth power transfer, excellent vibration isolation and easier maintenance compared to direct-drive models, significantly extending the service life of critical components.

●  Portable Wheeled Design: Equipped with heavy-duty rubber wheels and integrated ergonomic handle, allowing for easy mobility around large workshops, construction sites and industrial facilities.

●  Global Voltage Compatibility: Supports 220-240V input voltage, making it suitable for use in most countries and regions worldwide.

Expert Advice

 ●  Daily Tank Maintenance: Always drain condensed water from the drain valve at the bottom of the 300L horizontal air tank immediately after each use, especially in humid environments. For daily continuous operation, perform mid-shift drainage to prevent severe internal corrosion and ensure the highest quality compressed air.

●  Dual Pressure Operation: Select the appropriate working pressure (8Bar or 10Bar) strictly according to the specific requirements of your pneumatic tools. Using higher pressure than necessary will significantly increase energy consumption and accelerate wear of all critical components.

●  Belt Drive Maintenance: Regularly inspect the drive belt for wear, cracks or tension issues. Adjust belt tension every 3 months and replace the belt every 12 months for optimal power transfer and performance.

●  Lubrication Management: Check the pump lubricating oil level before each startup. Replace the pump oil every 300 operating hours to maintain optimal performance of the high-precision large-bore dual-cylinder pump.

●  Pressure Safety Regulation: Never exceed the maximum working pressure of 10Bar (145PSI). Adjust the pressure regulator precisely to match your tool's requirements for optimal energy efficiency and maximum operator safety.

●  Operation Limits: Avoid continuous operation beyond the rated duty cycle to prevent motor overheating. Allow a 20-minute cooling break after every 40 minutes of continuous full-load operation.

●  Mobility Safety: When moving the compressor, always use the integrated ergonomic handle and ensure the air tank is depressurized to below 1Bar for safe transportation.

●  Storage Guidelines: When storing for extended periods, drain all moisture completely from the 300L air tank, top up the pump lubricating oil and store in a dry, well-ventilated area away from direct sunlight and corrosive substances.

Troubleshooting Guide

FAQs

▼ What applications is this compressor suitable for?

The Cyclone Z-0.50SEU 300L 5.0HP industrial belt-driven compressor is ideal for large-scale manufacturing facilities, automotive service centers, heavy construction sites and continuous heavy-duty pneumatic tool operations including impact wrenches, air hammers, sandblasters, spray guns and air ratchets.

▼ What is the air delivery of this compressor?

The compressor delivers an industry-leading 525L/min air delivery, providing sufficient airflow for multiple heavy-duty professional applications and simultaneous operation of several high-demand pneumatic tools.

▼ What working pressures does this compressor support?

This compressor supports dual working pressure options: 8Bar / 0.8Mpa / 116PSI and 10Bar / 1Mpa / 145PSI, adapting to the full range of pneumatic tool requirements from light maintenance to heavy industrial applications.

▼ What is the pump shaft rated speed?

The pump shaft rated speed is only 950R.P.M, optimized for maximum air compression efficiency, minimal component wear, ultra-low vibration and exceptionally quiet operation.

▼ What are the advantages of the 300L horizontal air tank?

The 300L CE/ASME certified horizontal air tank provides massive extended air reserve, drastically reducing motor startup frequency, minimizing energy consumption and enabling prolonged continuous operation of high-demand pneumatic tools. The low-profile design also provides excellent stability during operation and transportation.