Home page

Cyclone ZA1524EU Oil-Lubricated Professional Direct Driven Compressor Compact High-Efficiency Oil-Lubricated Direct Driven Air Compressor for Light-Duty Professional Use

Engineered for compact size and reliable performance in small-scale working environments, the Cyclone ZA1524EU oil-lubricated professional direct driven compressor features a high-efficiency direct drive transmission system and durable oil-lubricated pump, delivering consistent compressed air for various light-duty applications. This unit is ideal for small workshops, home garages, DIY projects and light pneumatic tool operations, providing reliable compressed air supply with minimal space requirements. Backed by Cyclone's strict quality control standards, it ensures stable performance and long service life in daily use.

Category:

Direct Link Air Compressors

Product Inquiry

Related products

Product Details

On the technical data plate we will state following information
Name	Oil-Lubricated Professional Direct Driven Compressor
Cyclone Model NO:	ZA1524EU
Motor Peak Power:	1.1KW/1.5HP
Input Voltage:	220-240V
Air Delivery@50HZ	138L/min
Air Delivery@60HZ	166L/min
Pump Shaft Rated Speed@50HZ	2850r.p.m
Pump Shaft Rated Speed@60HZ	3450r.p.m
Piston Size	1*Dia.42mm
Stroke size	35mm
Max working pressure	8Bar /0.8Mpa/116PSI
Tank Capacity	Ce/ASME Qualified 24Lt Air Tank
Medium	Nonlethal Compressed Air

Key Features

● Efficient Direct Drive Transmission: Eliminates belt loss and maintenance requirements, delivering higher energy efficiency and more reliable power transfer compared to belt-driven models.

● Dual Frequency Compatibility: Automatically adapts to both 50HZ and 60HZ power supplies, providing 138L/min @ 50HZ and 166L/min @ 60HZ air delivery for global use.

● Compact Lightweight Design: Equipped with a 24L CE/ASME certified air tank, occupying minimal space while providing sufficient air reserve for daily light-duty operations.

● Durable Oil-Lubricated Pump: Features a single-cylinder pump with Dia.42mm piston size and 35mm stroke length, optimized for efficient air compression and long service life.

● Professional Power Output: Delivers 1.1KW (1.5HP) peak power with 8Bar (116PSI) maximum working pressure, meeting the requirements of most light pneumatic tools.

● Optimized Pump Speed: Operates at 2850r.p.m @ 50HZ and 3450r.p.m @ 60HZ, balanced for efficient air compression and reliable continuous operation.

● International Safety Certification: 24L thick-gauge steel air tank with CE/ASME certification, ensuring safe and stable pressure retention during operation.

Expert Advice

● Daily Tank Maintenance: Always drain condensed moisture from the 24L air tank immediately after each use, especially in humid environments, to prevent internal corrosion and ensure compressed air quality.

● Lubrication Management: Regularly check the pump lubricating oil level and replace oil according to the maintenance schedule to ensure optimal pump performance and extend service life.

● Pressure Regulation: Never exceed the maximum working pressure of 8Bar (116PSI). Adjust the pressure regulator according to the specific requirements of your pneumatic tools to avoid equipment damage.

● Power Supply Compatibility: This compressor supports both 50HZ and 60HZ power supplies within the 220-240V input voltage range. Ensure the power supply matches your local grid specifications before use.

● Operation Limits: Avoid continuous operation beyond the rated duty cycle to prevent motor overheating and premature component wear. Allow sufficient cooling breaks between extended use periods.

● Storage Guidelines: When storing the compressor for extended periods, drain all moisture from the 24L air tank and store in a dry, well-ventilated area away from direct sunlight and corrosive substances.

Troubleshooting Guide

Problem

Possible Cause

Recommended Solution

Compressor fails to start

1. No power supply or damaged power cord

2. Blown fuse or tripped circuit breaker

3. Faulty pressure switch

4. Motor overload protection activated

1. Check power supply and inspect power cord for damage

2. Reset circuit breaker or replace fuse with correct rating

3. Test and replace faulty pressure switch

4. Allow motor to cool completely before restarting

Pressure builds too slowly or fails to reach 8Bar

1. Air leaks in hoses, fittings or check valve

2. Worn piston rings or valves in the pump

3. Clogged air intake filter

4. Pump shaft speed below rated value

1. Perform leak test with soapy water and repair all leaks

2. Inspect and replace worn pump components

3. Clean or replace the air intake filter

4. Check power supply frequency and voltage

Motor runs but no air pressure

1. Broken intake or exhaust valve

2. Seized pump mechanism due to insufficient lubrication

3. Damaged pump shaft or bearings

4. Leaking check valve

1. Inspect and replace faulty valves

2. Check pump lubricating oil level and top up if necessary

3. Repair or replace damaged pump components

4. Inspect and replace leaking check valve

Excessive noise or vibration

1. Loose mounting bolts or fasteners

2. Worn motor or pump bearings

3. Unbalanced motor shaft

4. Uneven placement surface

5. Low pump lubricating oil level

1. Tighten all bolts and fasteners securely

2. Replace worn bearings

3. Service or replace unbalanced motor shaft

4. Place compressor on a flat, stable surface

5. Top up pump lubricating oil to recommended level

Motor overheats

1. Continuous overload operation

2. Clogged cooling vents

3. Poor ventilation

4. Low pump lubricating oil level

5. Power supply voltage too low

1. Allow cooling breaks between runs

2. Clear obstructions from cooling vents

3. Move to a well-ventilated area

4. Top up pump lubricating oil

5. Ensure power supply voltage is within 220-240V range

Air pressure drops significantly under load

1. Undersized, kinked or damaged air hoses

2. Faulty pressure regulator

3. Leaking check valve in the 24L tank

4. Total air consumption exceeds compressor capacity

5. Worn pump components

1. Replace with appropriate diameter hoses and remove kinks

2. Calibrate or replace pressure regulator

3. Inspect, clean or replace check valve

4. Reduce number of simultaneously operating tools

5. Inspect and replace worn pump components

FAQs

▼ What size air compressor do I need?

The Cyclone ZA1524EU 24L 1.5HP oil-lubricated direct driven compressor delivers 138L/min @ 50HZ and 166L/min @ 60HZ air delivery, making it ideal for small workshops, home garages, DIY projects and light pneumatic tool operations.

▼ What is the maximum working pressure of this compressor?

The maximum working pressure is 8Bar / 0.8Mpa / 116PSI, suitable for most light-duty pneumatic tools and applications.

▼ Does this compressor support both 50HZ and 60HZ power supplies?

Yes, this compressor is designed for dual frequency operation, automatically adapting to both 50HZ and 60HZ power supplies within the 220-240V input voltage range.

▼ What is the pump shaft rated speed?

The pump shaft rated speed is 2850r.p.m @ 50HZ and 3450r.p.m @ 60HZ, optimized for efficient air compression and reliable operation.

▼ How often should I drain the air tank?

Drain the 24L air tank daily after every use, or more frequently in humid environments, to prevent internal corrosion and water contamination.

Keywords:

home painting air compressor

hobby DIY pneumatic compressor

domestic compact air compressor

small workshop piston compressor

DIY garage air compressor

home use air compressor

household piston compressor