Home page

Cyclone FAST2050EU Fast & Oil-Free Air Compressors High-Performance Dual-Piston Oil-Free Air Compressor | 50L Wheeled Tank &Dual-Frequency Versatility

Engineered for reliable, extended-run performance in light-duty workshop and home applications, the Cyclone FAST2050EU oil-free air compressor features a compact, wheeled design with a 2.0HP high-efficiency motor, dual-piston pump and 50L horizontal air tank. Optimized for both 50Hz and 60Hz power grids, it delivers exceptional air output for its class. This unit is ideal for hobby work, small to medium pneumatic tools, and DIY projects, offering both power and portability with longer runtime.

Category:

Fast and Oil-Free Compressors

Product Inquiry

Related products

Product Details

On the technical data plate we will state following information
Name	Fast &Oil-Free Air Compressors
Cyclone Model NO:	FAST2024EU
Motor Peak Power:	1.5KW/2.0HP
Input Voltage:	220-240V
Air Delivery@50HZ	255L/min
Air Delivery@60HZ	306L/min
Pump Shaft Rated Speed@50HZ	2850r.p.m
Pump Shaft Rated Speed@60HZ	3450r.p.m
Tank Specification	Dia.300500mm2.0mm,
Piston Size	Dia.63.7mm
Stroke size	14mm
Max working pressure	8Bar /0.8Mpa/116PSI
Tank Capacity	Ce/ASME Qualified 50Lt Air Tank
Medium	Nonlethal Compressed Air

Key Features

● Dual-Motor Dual-Pump System: Features two independent 1.5HP motors and dual-piston pumps, delivering exceptional total air delivery (336L/min @50Hz, 404L/min @60Hz), ideal for light-duty workshop applications.

● Dual-Frequency Versatility: Optimized for both 50Hz and 60Hz power grids, with corresponding performance boosts, making it suitable for use across different regions.

● Maintenance-Free Oil-Free Operation: No pump oil required, eliminating messy oil changes and ensuring clean, contamination-free air output.

● Built-In Redundancy & Load Adaptability: Can operate with one or both motors simultaneously, providing built-in redundancy and allowing continued use even if one motor requires maintenance.

● Portable Wheeled Design: Equipped with heavy-duty rubber wheels and an ergonomic handle, allowing for easy mobility around the workshop or between job locations.

● Robust 50L Air Tank: Built with 2.0mm thick steel (Dia.300×500mm), meeting CE/ASME safety standards for reliable pressure retention and extended runtime between cycles.

● Precision Pressure Control: Dual pressure gauges and adjustable regulator for accurate pressure monitoring and control, with automatic shut-off at 8Bar.

● Enhanced Power & Performance: Total 3.0HP (2.2KW) power delivers exceptional air delivery, suitable for light-duty workshop applications.

● Low Noise Operation: Optimized for quiet performance, making it suitable for use in home environments, hobby spaces and small workshops.

● Durable Construction: High-quality components and motor windings ensure long service life and reliable daily use.

Expert Advice

● Daily Maintenance: No pump oil changes required. Keep both air intake filters clean to ensure optimal airflow and performance.

● Pressure Operation: The compressor is designed for a maximum working pressure of 8Bar (116PSI). Do not attempt to adjust the pressure switch beyond factory settings.

● Ventilation & Operation Environment: Always use the compressor in a well-ventilated area. Avoid operating in enclosed spaces or extreme temperatures to prevent overheating.

● Frequency-Specific Performance: When operating on 60Hz power, expect higher air delivery (404L/min) but ensure the power supply is stable to prevent motor stress.

● Drain Condensed Water: After each use, drain any condensed water from the bottom of the 50L tank using the drain valve to prevent internal corrosion.

● Duty Cycle & Cooling: Allow a 5-minute cooling break after every 10 minutes of continuous operation with both motors running to prevent overheating and extend service life.

● Mobility Safety: When moving the compressor, always use the integrated handle and ensure the air tank is depressurized to below 1Bar for safe transportation.

● Storage Guidelines: When storing, ensure the tank is depressurized and drain all moisture from the tank. Store in a dry, well-ventilated area away from dust and moisture.

Troubleshooting Guide

Problem

Possible Cause

Recommended Solution

Compressor fails to start

1. No power supply or damaged power cord

2. Blown fuse or tripped circuit breaker

3. Faulty pressure switch

4. Motor overheating protection activated

1. Check power connection and inspect cord for damage

2. Reset circuit breaker or replace fuse with correct rating

3. Test and replace faulty pressure switch

4. Allow motor to cool completely before restarting

Only one motor runs

1. Faulty pressure switch for the second motor

2. Blown fuse or tripped breaker for one circuit

3. Defective motor starter or relay

4. Motor overload protection activated on one unit

1. Test and replace faulty pressure switch

2. Reset circuit breaker or replace fuse

3. Test and replace defective starter or relay

4. Allow the affected motor to cool completely

Pressure builds too slowly or fails to reach 8Bar

1. Air leaks in hoses, fittings or check valve

2. Clogged air intake filters

3. Loose or damaged hose connections

4. Voltage/frequency mismatch affecting motor speed

1. Perform a leak test with soapy water and repair leaks

2. Clean or replace both air intake filters

3. Tighten or replace damaged hose connections

4. Ensure power supply matches the compressor’s rated frequency

Motor runs but no air pressure

1. Broken intake or exhaust valve in either pump

2. Seized pump mechanism due to insufficient ventilation

3. Damaged pump shaft or bearings

4. Leaking check valve in the 50L tank

1. Inspect and replace faulty valves in both pumps

2. Ensure proper ventilation to prevent overheating and pump seizure

3. Repair or replace damaged pump components

4. Inspect, clean or replace the leaking check valve

Excessive noise or vibration

1. Uneven placement surface

2. Loose components or mounting screws

3. Motor or pump internal wear in either unit

1. Place compressor on a flat, stable surface

2. Tighten all loose components and screws

3. Contact service center for inspection

Motor overheats and shuts off

1. Continuous operation beyond duty cycle

2. Poor ventilation or blocked cooling vents

3. High ambient temperature or enclosed operation

1. Allow sufficient cooling breaks between use

2. Ensure proper ventilation and clear vents of obstructions

3. Operate in a well-ventilated area at moderate temperatures

Air pressure drops significantly under load

1. Undersized, kinked or damaged air hoses

2. Faulty pressure regulator

3. Leaking check valve in the 50L tank

4. Air consumption exceeds total compressor capacity

1. Replace with appropriate air hoses and remove kinks

2. Calibrate or replace the faulty pressure regulator

3. Inspect and replace the check valve

4. Reduce the number of simultaneously operating tools

FAQs

▼ What are the advantages of an oil-free compressor?

Oil-free compressors require no pump oil changes, resulting in zero maintenance costs and clean, oil-free compressed air. They are also lighter and more portable than oil-lubricated models, making them ideal for home and hobby use.

▼ What applications is this compressor suitable for?

The Cyclone FAST2050EU 50L 2.0HP oil-free compressor is ideal for inflating tires/sports equipment, airbrushing, hobby work, small to medium pneumatic tools (nail guns, staplers, spray guns) and light-duty workshop tasks, with longer runtime thanks to the larger tank.

▼ How does frequency affect performance?

At 50Hz, the pump runs at 2850r.p.m delivering 255L/min. At 60Hz, the speed increases to 3450r.p.m, boosting air delivery to 306L/min, providing faster inflation and tool operation in 60Hz regions.

▼ Is this compressor suitable for continuous use?

This is a light-duty compressor designed for intermittent use. It is recommended to allow a 5-minute cooling break after every 10 minutes of continuous operation to prevent overheating and extend service life.

▼ What safety standards does the tank meet?

The 50L air tank meets CE/ASME safety standards, with a 2.0mm thick steel construction (Dia.300×500mm) ensuring reliable pressure retention during use.

steel construction (Dia.300×500mm) ensuring reliable pressure retention during use.

Keywords:

fast oil-free air compressor

oil-free compressor

piston air compressor

home high flow air compressor

domestic fast charging air pump

DIY hobby spray paint compressor

household high cfm piston compressor

small home workshop fast air compressor

DIY furniture painting air compressor

domestic clean fast airflow compressor