Key Features

●  Dual-Motor Dual-Pump System: Features two independent 1.5HP motors and dual-piston pumps, delivering exceptional total air delivery (336L/min @50Hz, 404L/min @60Hz), ideal for light-duty workshop applications.

●  Dual-Frequency Versatility: Optimized for both 50Hz and 60Hz power grids, with corresponding performance boosts, making it suitable for use across different regions.

●  Maintenance-Free Oil-Free Operation: No pump oil required, eliminating messy oil changes and ensuring clean, contamination-free air output.

●  Built-In Redundancy & Load Adaptability: Can operate with one or both motors simultaneously, providing built-in redundancy and allowing continued use even if one motor requires maintenance.

●  Portable Wheeled Design: Equipped with heavy-duty rubber wheels and an ergonomic handle, allowing for easy mobility around the workshop or between job locations.

●  Robust 50L Air Tank: Built with 2.0mm thick steel (Dia.300×500mm), meeting CE/ASME safety standards for reliable pressure retention and extended runtime between cycles.

●  Precision Pressure Control: Dual pressure gauges and adjustable regulator for accurate pressure monitoring and control, with automatic shut-off at 8Bar.

●  Enhanced Power & Performance: Total 3.0HP (2.2KW) power delivers exceptional air delivery, suitable for light-duty workshop applications.

●  Low Noise Operation: Optimized for quiet performance, making it suitable for use in home environments, hobby spaces and small workshops.

●  Durable Construction: High-quality components and motor windings ensure long service life and reliable daily use.

Expert Advice

●  Daily Maintenance: No pump oil changes required. Keep both air intake filters clean to ensure optimal airflow and performance.

●  Pressure Operation: The compressor is designed for a maximum working pressure of 8Bar (116PSI). Do not attempt to adjust the pressure switch beyond factory settings.

●  Ventilation & Operation Environment: Always use the compressor in a well-ventilated area. Avoid operating in enclosed spaces or extreme temperatures to prevent overheating.

●  Frequency-Specific Performance: When operating on 60Hz power, expect higher air delivery (404L/min) but ensure the power supply is stable to prevent motor stress.

●  Drain Condensed Water: After each use, drain any condensed water from the bottom of the 50L tank using the drain valve to prevent internal corrosion.

●  Duty Cycle & Cooling: Allow a 5-minute cooling break after every 10 minutes of continuous operation with both motors running to prevent overheating and extend service life.

●  Mobility Safety: When moving the compressor, always use the integrated handle and ensure the air tank is depressurized to below 1Bar for safe transportation.

●  Storage Guidelines: When storing, ensure the tank is depressurized and drain all moisture from the tank. Store in a dry, well-ventilated area away from dust and moisture.

Troubleshooting Guide

FAQs

▼ What are the advantages of the dual-motor design?

The dual-motor system provides three key benefits: 1) Enhanced total air delivery (up to 404L/min), suitable for light-duty workshop applications; 2) Built-in redundancy, allowing continued use even if one motor requires maintenance; 3) The ability to run on one motor for lighter tasks, reducing energy consumption.

▼ What applications is this compressor suitable for?

The Cyclone FAST3050EU 50L 3.0HP dual-motor oil-free compressor is ideal for hobby work, small to medium pneumatic tools (spray guns, nail guns, staplers), and light-duty workshop tasks.

▼ How does frequency affect performance?

At 50Hz, each pump runs at 2850r.p.m delivering 168L/min (total 336L/min). At 60Hz, the speed increases to 3450r.p.m, boosting each pump to 202L/min (total 404L/min), providing faster inflation and tool operation in 60Hz regions.

▼ Is this compressor suitable for continuous use?

This is a light-duty compressor designed for intermittent use. It is recommended to allow a 5-minute cooling break after every 10 minutes of continuous operation with both motors running to prevent overheating and extend service life.

▼ What safety standards does the tank meet?

The 50L air tank meets CE/ASME safety standards, with a 2.0mm thick steel construction (Dia.300×500mm) ensuring reliable pressure retention during use.