Key Features

● Efficient Electric Motor: Equipped with a high-performance electric motor, delivering 2.2KW (3.0HP) peak power, with 220-240V/50HZ input voltage, providing stable and efficient power for professional operations.

● Stable Air Delivery Performance: Max air delivery of 335L/min, with 316L/min @ 60Psi and 292L/min @ 90Psi, meeting the airflow demands of various professional pneumatic tools and auxiliary operations.

● Aluminium Alloy MonoBlock Pump: Adopts durable aluminium alloy monoblock pump design, with Dia.65mm*2 bore/piston size and 46mm stroke length, ensuring efficient air compression and long service life.

● 100L Large-Capacity Air Tank: CE/ASME qualified thick-gauge steel tank, ensuring safe and stable pressure retention, reducing frequent startup of the motor and extending service life.

● Reliable Electrical Protection: Equipped with 200vf+50Vf motor capacitors, 12.5A rated electric current, and 15.0A overload current protector, effectively preventing electrical faults and ensuring safe operation.

● Convenient Starting: 160V starting capacity with 20M power cable, allowing flexible use in different working scenarios and ensuring reliable startup even in unstable voltage environments.

● Stable Operation: 300mm pump flywheel, 120mm motor pulley, and 1120 r.p.m pump shaft rated speed, ensuring smooth operation, low vibration and stable airflow output; 94dB noise level, balancing performance and user comfort.

● Reliable Lubrication: 1.0L pump lubricate oil capacity, effectively reducing wear of internal components and extending the service life of the compressor.

Expert Advice

● Daily Tank Drainage: Always drain condensed moisture from the 100L tank after each use, or more frequently in humid environments, to prevent internal corrosion, water contamination and ensure compressed air quality.

● Electrical Safety: Ensure the input voltage is 220-240V/50HZ before use; check the 20M power cable for damage regularly, and avoid using the compressor in wet environments to prevent electric shock.

● Lubrication Maintenance: Check the pump lubricate oil level (1.0L capacity) before each startup; replace oil according to the maintenance schedule to ensure good lubrication of the air pump.

● Motor Protection: Do not overload the compressor beyond the 12.5A rated electric current; the 15.0A overload current protector will trigger if overloaded, please cut off the power and check the cause before restarting.

● Starting Attention: Ensure the starting capacity is within 160V; if the voltage is unstable, avoid starting the compressor to prevent motor damage. The 20M power cable allows flexible placement, but avoid dragging or damaging the cable.

● Component Inspection: Regularly check the pump flywheel (300mm), motor pulley (120mm), and drive belt for wear or looseness; adjust or replace in time to ensure normal power transmission.

● Pump Maintenance: Regularly inspect the aluminium alloy monoblock pump, bore (Dia.65mm*2) and piston stroke (46mm) for wear; clean or replace components as needed to maintain optimal air delivery performance.

Troubleshooting Guide

FAQs

▼ What size air compressor do I need?

The right compressor depends on your CFM and pressure requirements. For professional workshops, industrial auxiliary operations and daily pneumatic tool use, the Cyclone Z-0.25EU 100L 3.0HP electric model provides sufficient power (2.2KW) and stable air delivery (max 335L/min).

▼ How often must I drain an air compressor?

Drain the 100L tank daily after every use, or more frequently in humid environments, to prevent internal corrosion and water contamination.

▼ What oil do I use in my air compressor?

Use professional compressor-grade non-detergent oil for the air pump, with a capacity of 1.0L; refer to the product manual for specific oil specifications.

▼ Can I use this compressor in wet environments?

No. This is an electric compressor, and using it in wet environments may cause electric shock. Always operate in a dry, well-ventilated area.

▼ What should I do if the overload current protector triggers?

First, cut off the power supply, check if the electrical load exceeds 12.5A or if the input voltage is unstable, eliminate the fault, then reset the overload current protector and restart the compressor.