Home page

Cyclone ZB1524EU Oil-Lubricated Professional Direct Driven Compressor Compact High-Efficiency Oil-Lubricated Direct Driven Air Compressor for Light-Duty Professional Use

Engineered for reliable performance in space-constrained working environments, the Cyclone ZB1524EU oil-lubricated professional direct driven compressor features a maintenance-free direct drive transmission system and durable single-cylinder oil-lubricated pump, delivering consistent compressed air output for daily light-duty operations. This unit is perfectly suited for home garages, small DIY workshops, hobbyist projects and basic pneumatic tool applications, combining compact size with professional-grade durability. Backed by Cyclone's rigorous manufacturing standards, it ensures long-lasting stable performance with minimal maintenance requirements.

Category:

Direct Link Air Compressors

Product Inquiry

Related products

Product Details

On the technical data plate we will state following information
Name	Oil-Lubricated Professional Direct Driven Compressor
Cyclone Model NO:	ZB1524EU
Motor Peak Power:	1.1KW/1.5HP
Input Voltage:	220-240V/50HZ
Air Delivery@50HZ	138L/min
Air Delivery@60HZ	166L/min
Pump Shaft Rated Speed@50HZ	2850r.p.m
Pump Shaft Rated Speed@60HZ	3450r.p.m
Piston Size	1*Dia.42mm
Stroke size	35mm
Max working pressure	8Bar /0.8Mpa/116PSI
Tank Capacity	Ce/ASME Qualified 24Lt Air Tank
Medium	Nonlethal Compressed Air

Key Features

● Zero-Maintenance Direct Drive System: Eliminates belt adjustment, replacement and power loss issues, delivering higher energy efficiency and more reliable power transfer than belt-driven alternatives.

● Global Dual Frequency Compatibility: Automatically adapts to both 50HZ and 60HZ power grids, providing 138L/min @ 50HZ and 166L/min @ 60HZ air delivery for worldwide use.

● Precision-Engineered Single-Cylinder Pump: Features a Dia.42mm piston and 35mm stroke design, optimized for balanced air compression efficiency and low operating noise.

● Space-Saving Compact Design: Equipped with a 24L CE/ASME certified air tank, occupying minimal floor space while providing sufficient air reserve for intermittent light-duty operations.

● Durable Oil-Lubricated Construction: The oil-lubricated pump design effectively reduces friction and heat buildup, significantly extending the service life of internal components.

● Reliable Power Output: Delivers 1.1KW (1.5HP) peak power with a maximum working pressure of 8Bar (116PSI), meeting the requirements of most common light pneumatic tools.

● Optimized Variable Speed Operation: Operates at 2850r.p.m @ 50HZ and 3450r.p.m @ 60HZ, perfectly balanced for efficient air compression and stable continuous operation.

● International Safety Certification: 24L thick-gauge steel air tank with CE/ASME certification, ensuring safe pressure retention and reliable operation under all conditions.

Expert Advice

● Daily Tank Drainage: Always drain condensed moisture from the 24L air tank immediately after each use, especially in humid climates, to prevent internal corrosion and ensure compressed air quality.

● Lubrication Maintenance: Check the pump lubricating oil level before each startup. Replace the pump oil every 300 operating hours to maintain optimal pump performance and prevent premature wear.

● Pressure Safety: Never exceed the maximum working pressure of 8Bar (116PSI). Adjust the pressure regulator to match the specific requirements of your pneumatic tools to avoid equipment damage.

● Power Supply Verification: Ensure the input voltage is within the 220-240V range. The compressor automatically adapts to 50HZ or 60HZ frequencies, no manual adjustment required.

● Duty Cycle Compliance: Avoid continuous operation beyond the rated duty cycle to prevent motor overheating. Allow a 15-minute cooling break after every 30 minutes of continuous use.

● Proper Storage: When storing for extended periods, drain all moisture from the 24L air tank and top up the pump lubricating oil. Store in a dry, well-ventilated area away from direct sunlight.

Troubleshooting Guide

Problem

Possible Cause

Recommended Solution

Compressor fails to start

1. No power supply or damaged power cord

2. Blown fuse or tripped circuit breaker

3. Faulty pressure switch

4. Motor overload protection activated

1. Check power connection and inspect cord for damage

2. Reset circuit breaker or replace fuse with correct rating

3. Test and replace faulty pressure switch

4. Allow motor to cool completely for 30 minutes before restarting

Pressure builds too slowly or fails to reach 8Bar

1. Air leaks in hoses, fittings or check valve

2. Worn piston rings or valves in the 42mm bore pump

3. Clogged air intake filter

4. Pump shaft speed below rated value

1. Perform leak test with soapy water and repair all leaks

2. Inspect and replace worn pump components

3. Clean or replace the air intake filter

4. Verify power supply frequency matches rated speed

Motor runs but no air pressure

1. Broken intake or exhaust valve

2. Seized pump due to insufficient lubrication

3. Damaged pump shaft or bearings

4. Leaking check valve in the 24L tank

1. Inspect and replace faulty valves

2. Check pump oil level and top up if necessary

3. Repair or replace damaged pump components

4. Inspect and replace leaking check valve

Excessive noise or vibration

1. Loose mounting bolts or fasteners

2. Worn motor or pump bearings

3. Unbalanced motor shaft

4. Uneven placement surface

5. Low pump lubricating oil level

1. Tighten all bolts and fasteners securely

2. Replace worn bearings

3. Service or replace unbalanced motor shaft

4. Place compressor on a flat, stable surface

5. Top up pump oil to recommended level

Motor overheats

1. Continuous operation beyond duty cycle

2. Clogged motor cooling vents

3. Poor ventilation in operating area

4. Low pump lubricating oil level

5. Power supply voltage outside 220-240V range

1. Allow sufficient cooling breaks between runs

2. Clear obstructions from cooling vents

3. Move to a well-ventilated area

4. Top up pump lubricating oil

5. Ensure power supply voltage is within specified range

Air pressure drops under load

1. Undersized, kinked or damaged air hoses

2. Faulty pressure regulator

3. Leaking check valve in the 24L tank

4. Total air consumption exceeds compressor capacity

5. Worn pump piston rings or valves

1. Replace with appropriate diameter hoses and remove kinks

2. Calibrate or replace pressure regulator

3. Inspect and replace check valve

4. Reduce number of simultaneously operating tools

5. Inspect and replace worn pump components

FAQs

▼ What applications is this compressor suitable for?

The Cyclone ZB1524EU 24L 1.5HP oil-lubricated direct driven compressor is ideal for home garages, small DIY workshops, hobbyist projects and basic pneumatic tool operations such as nail guns, airbrushes and tire inflation.

▼ What is the maximum working pressure?

The maximum working pressure is 8Bar / 0.8Mpa / 116PSI, suitable for most light-duty pneumatic tools and applications.

▼ Does this compressor support both 50HZ and 60HZ power supplies?

Yes, this compressor features automatic dual frequency adaptation, operating seamlessly on both 50HZ and 60HZ power supplies within the 220-240V input voltage range.

▼ What is the pump shaft rated speed?

The pump shaft rated speed is 2850r.p.m @ 50HZ and 3450r.p.m @ 60HZ, optimized for efficient air compression and long component life.

▼ How often should I drain the air tank?

Drain the 24L air tank daily after every use, or more frequently in humid environments, to prevent internal corrosion and water contamination.

Keywords:

direct-link air compressor

oil-lube air compressor

piston air compressor

direct driven air compressor

household piston compressor

home use air compressor

DIY garage air compressor