Cyclone ZB1824EU Oil-Lubricated Professional Direct Driven Compressor High-Power High-Airflow Compact Oil-Lubricated Direct Driven Air Compressor for Light-to-Medium Duty Professional Use
Engineered for exceptional power and airflow performance in a compact form factor, the Cyclone ZB1824EU oil-lubricated professional direct driven compressor features an upgraded high-torque motor and precision-engineered large-bore pump, delivering outstanding compressed air output for its class. This unit is purpose-built for small professional workshops, automotive maintenance bays, advanced DIY projects and light-to-medium duty pneumatic tool operations, combining professional-grade performance with space-saving design. Backed by Cyclone's stringent manufacturing standards, it ensures reliable long-term operation with minimal maintenance requirements.
Category:
Direct Link Air Compressors
Product Details
|
On the technical data plate we will state following information |
|
|
Name |
Oil-Lubricated Professional Direct Driven Compressor |
|
Cyclone Model NO: |
ZB1824EU |
|
Motor Peak Power: |
1.3KW/1.8HP |
|
Input Voltage: |
220-240V/50HZ |
|
Air Delivery@50HZ |
173L/min |
|
Air Delivery@60HZ |
208L/min |
|
Pump Shaft Rated Speed@50HZ |
2850r.p.m |
|
Pump Shaft Rated Speed@60HZ |
3450r.p.m |
|
Piston Size |
1*Dia.47mm |
|
Stroke size |
35mm |
|
Max working pressure |
8Bar /0.8Mpa/116PSI |
|
Tank Capacity |
Ce/ASME Qualified 24Lt Air Tank |
|
Medium |
Nonlethal Compressed Air |
Key Features
● Upgraded 1.8HP High-Torque Motor: Delivers 1.3KW (1.8HP) peak power output, providing stronger starting torque and more stable performance under continuous load conditions.
● Class-Leading Dual Frequency Airflow: Automatically adapts to both 50HZ and 60HZ power grids, delivering exceptional 173L/min @ 50HZ and 208L/min @ 60HZ air delivery for global market compatibility.
● Large-Bore Precision Pump Design: Features a single-cylinder pump with enlarged Dia.47mm piston size and 35mm stroke length, optimized for maximum air compression efficiency and higher output volume.
● Maintenance-Free Direct Drive System: Eliminates belt slip, adjustment and replacement requirements, delivering up to 95% energy efficiency and more reliable power transfer than traditional belt-driven models.
● Space-Saving Compact Design: Equipped with a 24L CE/ASME certified air tank, occupying minimal floor space while providing sufficient air reserve for continuous light-to-medium duty operations.
● Durable Oil-Lubricated Construction: The oil-lubricated pump design effectively reduces friction and heat generation, significantly extending the service life of critical internal components.
● Professional Pressure Performance: Delivers a maximum working pressure of 8Bar (116PSI), meeting the requirements of most common pneumatic tools including impact wrenches, spray guns and nail guns.
● Optimized Variable Speed Operation: Operates at 2850r.p.m @ 50HZ and 3450r.p.m @ 60HZ, perfectly balanced for efficient air compression, low vibration and reliable continuous operation.
● International Safety Certification: 24L thick-gauge steel air tank with CE/ASME certification, ensuring safe and stable pressure retention under all operating conditions.
Expert Advice
● Daily Tank Maintenance: Always drain condensed moisture from the 24L air tank immediately after each use, especially in humid environments, to prevent internal corrosion and ensure the purity of compressed air.
● Lubrication Management: Check the pump lubricating oil level before each startup. Replace the pump oil every 300 operating hours or as recommended in the product manual to maintain optimal pump performance.
● Pressure Safety Regulation: Never exceed the maximum working pressure of 8Bar (116PSI). Adjust the pressure regulator according to the specific requirements of your pneumatic tools to avoid equipment damage and ensure operator safety.
● Power Supply Compatibility: This compressor supports both 50HZ and 60HZ power supplies within the 220-240V input voltage range. Ensure the power supply matches your local grid specifications before use.
● Duty Cycle Compliance: Avoid continuous operation beyond the rated duty cycle to prevent motor overheating. Allow a 10-minute cooling break after every 30 minutes of continuous operation.
● Proper Storage Guidelines: When storing the compressor for extended periods, drain all moisture from the 24L air tank and top up the pump lubricating oil. Store in a dry, well-ventilated area away from direct sunlight and corrosive substances.
Troubleshooting Guide
|
Problem |
Possible Cause |
Recommended Solution |
|
Compressor fails to start |
1. No power supply or damaged power cord 2. Blown fuse or tripped circuit breaker 3. Faulty pressure switch 4. Motor overload protection activated |
1. Check power connection and inspect cord for damage 2. Reset circuit breaker or replace fuse with correct rating 3. Test and replace faulty pressure switch 4. Allow motor to cool completely for 30 minutes before restarting |
|
Pressure builds too slowly or fails to reach 8Bar |
1. Air leaks in hoses, fittings, check valve or tank 2. Worn piston rings or valves in the 47mm bore pump 3. Clogged air intake filter 4. Pump shaft speed below rated value |
1. Perform a leak test with soapy water and repair all leaks 2. Inspect and replace worn pump piston rings or valves 3. Clean or replace the air intake filter 4. Verify power supply frequency matches the rated speed |
|
Motor runs but no air pressure |
1. Broken intake or exhaust valve in the pump 2. Seized pump mechanism due to insufficient lubrication 3. Damaged pump shaft or bearings 4. Leaking check valve in the 24L tank |
1. Inspect and replace faulty intake/exhaust valves 2. Check pump lubricating oil level and top up if necessary 3. Repair or replace damaged pump components 4. Inspect, clean or replace the leaking check valve |
|
Excessive noise or vibration |
1. Loose mounting bolts or fasteners 2. Worn motor or pump bearings 3. Unbalanced motor shaft 4. Uneven placement surface 5. Low pump lubricating oil level |
1. Tighten all bolts and fasteners securely 2. Replace worn motor or pump bearings 3. Service or replace unbalanced motor shaft 4. Place compressor on a flat, stable surface 5. Top up pump lubricating oil to the recommended level |
|
Motor overheats |
1. Continuous overload operation beyond duty cycle 2. Clogged motor cooling vents 3. Poor ventilation in operating area 4. Low pump lubricating oil level 5. Power supply voltage outside 220-240V range |
1. Allow sufficient cooling breaks between operation cycles 2. Clear all obstructions from motor cooling vents 3. Move compressor to a well-ventilated area 4. Top up pump lubricating oil 5. Ensure power supply voltage is within specified range |
|
Air pressure drops significantly under load |
1. Undersized, kinked or damaged air hoses 2. Faulty pressure regulator 3. Leaking check valve in the 24L tank 4. Total air consumption exceeds compressor capacity5. Worn pump piston rings or valves |
1. Replace with appropriate diameter hoses and remove kinks 2. Calibrate or replace the faulty pressure regulator 3. Inspect and replace the check valve 4. Reduce the number of simultaneously operating tools 5. Inspect and replace worn pump components |
FAQs
▼ What applications is this compressor suitable for?
The Cyclone ZB1824EU 24L 1.8HP oil-lubricated direct driven compressor is ideal for small professional workshops, automotive maintenance, advanced DIY projects and light-to-medium duty pneumatic tool operations including impact wrenches, spray guns, nail guns and air ratchets.
▼ What is the maximum working pressure of this compressor?
The maximum working pressure is 8Bar / 0.8Mpa / 116PSI, suitable for most common pneumatic tools and applications.
▼ Does this compressor support both 50HZ and 60HZ power supplies?
Yes, this compressor features automatic dual frequency adaptation, operating seamlessly on both 50HZ and 60HZ power supplies within the 220-240V input voltage range for global use.
▼ What is the pump shaft rated speed?
The pump shaft rated speed is 2850r.p.m @ 50HZ and 3450r.p.m @ 60HZ, optimized for maximum air compression efficiency and long component service life.
▼ How often should I drain the air tank?
Drain the 24L air tank daily after every use, or more frequently in humid environments, to prevent internal corrosion and water contamination of the compressed air.
Keywords:
Previous page
Next page
Previous page
Next page
Related products
Contact
0086-576-86330886 86330885
+86-13586276000
sailor@chinacyclone.com
Get a Free Consultancy
